- Price:
- ZAR 31,700.00
- Sold by:
-
Ibr Fire
ASIB 25 Year Sprinkler Pipe Laboratory Test.
Pipes sent for testing must represent the installation of a Single control valve /Â occupancy within a
division or area;
Therefore, all the different diameters used in the installation must be sent for testing in order to represent the entire installation.
Required Pipes per each Installation / Single Control Valve:
- 2 x Range pipe: 25 - 50 mm x 2
- 1 x Distribution pipe: 65 - 80 mm
- 1 x Main valve pipe: 100 - 2000 mm
Where installations / buildings consist of a large number of pipes of the same diameter, it is
recommended that an additional range and distribution pipe be submitted for testing, with at least
one fitting untampered.
The pipes undergo a static pressure Test (Hydrostatic Test) to check for leakage.Â
- Pipes less than or equal to 150 mm diameter are tested in accordance with SANS 62 – 1:2013
- Pipes larger than 150 mm are tested in accordance with SANS 719:2011
The pipes are visually inspected before and after the tests.
The Above Price:
- Includes New Piping to Replace the Removed Samples
- Excludes Lifting Equipment / Scaffolding
CATALOGUE NAME : Projects (Supply and Install) - Technical Consultants Only
CATEGORY : Commercial Construction / Demolition Industrial Mining / Quarry / Civil Works Production Services
ASIB 25 Year Sprinkler Pipe Laboratory Test.
Pipes sent for testing must represent the installation of a Single control valve / occupancy within a
division or area;
Therefore, all the different diameters used in the installation must be sent for testing in order to represent the entire installation.
Required Pipes per each Installation / Single Control Valve:
- 2 x Range pipe: 25 - 50 mm x 2
- 1 x Distribution pipe: 65 - 80 mm
- 1 x Main valve pipe: 100 - 2000 mm
Where installations / buildings consist of a large number of pipes of the same diameter, it is
recommended that an additional range and distribution pipe be submitted for testing, with at least
one fitting untampered.
The pipes undergo a static pressure Test (Hydrostatic Test) to check for leakage.
- Pipes less than or equal to 150 mm diameter are tested in accordance with SANS 62 – 1:2013
- Pipes larger than 150 mm are tested in accordance with SANS 719:2011
The pipes are visually inspected before and after the tests.
The Above Price:
- Includes New Piping to Replace the Removed Samples
- Excludes Lifting Equipment / Scaffolding
ASIB 25 Year Sprinkler Pipe Laboratory Test.
Pipes sent for testing must represent the installation of a Single control valve / occupancy within a
division or area;
Therefore, all the different diameters used in the installation must be sent for testing in order to represent the entire installation.
Required Pipes per each Installation / Single Control Valve:
- 2 x Range pipe: 25 - 50 mm
- 1 x Distribution pipe: 65 - 80 mm
- 1 x Main valve pipe: 100 - 2000 mm
Where installations / buildings consist of a large number of pipes of the same diameter, it is
recommended that an additional range and distribution pipe be submitted for testing, with at least
one fitting untampered.
The pipes undergo a static pressure Test (Hydrostatic Test) to check for leakage.
- Pipes less than or equal to 150 mm diameter are tested in accordance with SANS 62 – 1:2013
- Pipes larger than 150 mm are tested in accordance with SANS 719:2011
The pipes are visually inspected before and after the tests.
The Above Price:
- Includes New Piping to Replace the Removed Samples
- Excludes Lifting Equipment / Scaffolding
