- Price:
- ZAR 2,500.00
- Sold by:
-
Ibr Fire
Hose Reel Flow Test
The Test will be Conducted as Follows
- Attach the Ultrasonic Flow Meter to the Hose Reel Vertical / Horizontal 25mm Drop Supply Before the CP Valve
- Set Up the Flow Meter - Pipe Diameter, Wall Thickness and Pipe Material
- A Pressure Gauge is Required on the Hose Reel to be Tested - Quoted Seperatly if Required
- Fully Open the Hose Reel CP Valve but keep the Nozzle Closed - Record Standing Pressure (Zero Flow)
- Fully Open the Hose Reel CP Valve and Nozzle - Record Flow Rate and Pressure
- Above Testing is done Hourly from 06h00 to 18h00
- Council Supply Averages based on 13 Tests in Total
Why an Ultrasonic Flow Meter.
- Ultrasonic flow meter is used to measure flow rates of clean liquid (liquid with not more than 5% solids or 2% gas) in pipes.
- Will work on most types of non-aerated liquids with low solid particle content such as water, sea water and most oils.
- The equipment comes with clamp on transducers for non-invasive measurement.
- The unit uses two sensor, one that acts as an ultrasonic transmitter and the other as a receiver.
- The software calculates the time it takes for the ultrasonic pulse to pass from the transmitter to the receiver, which is dependent on the flow rate.
Ultrasonic Meter Specifications
- Pipe Diameter Range: 25mm – 50mm
- Sensor Dimensions: 318mm x 59mm x 85mm
- Operating Temperature: -30°C to 90°C
- Accuracy ±1% - 2% value of the reading (0.5 - 30m/s)
- Pipe Material
- Cast Iron
- Stainless Steel
- Ductile Iron
- Copper
- PVC
On Completion of the Flow Test a Report will be Provided Specifying:
- Flow Rate - One Hose Reel In Operation
- Standing Pressure of Hose Reel (Zero Flow)
- Pressure at Flow Reading - One Hose Reel in Operation
- Average Readings based on 13 Tests in Total
CATALOGUE NAME : Projects (Supply and Install) - Technical Consultants Only
CATEGORY : Commercial Construction / Demolition Industrial Mining / Quarry / Civil Works Production Services
Hose Reel Flow Test
The Test will be Conducted as Follows
- Attach the Ultrasonic Flow Meter to the Hose Reel Vertical / Horizontal 25mm Drop Supply Before the CP Valve
- Set Up the Flow Meter - Pipe Diameter, Wall Thickness and Pipe Material
- A Pressure Gauge is Required on the Hose Reel to be Tested - Quoted Seperatly if Required
- Fully Open the Hose Reel CP Valve but keep the Nozzle Closed - Record Standing Pressure (Zero Flow)
- Fully Open the Hose Reel CP Valve and Nozzle - Record Flow Rate and Pressure
- Above Testing is done Hourly from 06h00 to 18h00
- Council Supply Averages based on 13 Tests in Total
Why an Ultrasonic Flow Meter.
- Ultrasonic flow meter is used to measure flow rates of clean liquid (liquid with not more than 5% solids or 2% gas) in pipes.
- Will work on most types of non-aerated liquids with low solid particle content such as water, sea water and most oils.
- The equipment comes with clamp on transducers for non-invasive measurement.
- The unit uses two sensor, one that acts as an ultrasonic transmitter and the other as a receiver.
- The software calculates the time it takes for the ultrasonic pulse to pass from the transmitter to the receiver, which is dependent on the flow rate.
Ultrasonic Meter Specifications
- Pipe Diameter Range: 25mm – 50mm
- Sensor Dimensions: 318mm x 59mm x 85mm
- Operating Temperature: -30°C to 90°C
- Accuracy ±1% - 2% value of the reading (0.5 - 30m/s)
- Pipe Material
- Cast Iron
- Stainless Steel
- Ductile Iron
- Copper
- PVC
On Completion of the Flow Test a Report will be Provided Specifying:
- Flow Rate - One Hose Reel In Operation
- Standing Pressure of Hose Reel (Zero Flow)
- Pressure at Flow Reading - One Hose Reel in Operation
- Average Readings based on 13 Tests in Total
Hose Reel Flow Test
The Test will be Conducted as Follows
- Attach the Ultrasonic Flow Meter to the Hose Reel Vertical / Horizontal 25mm Drop Supply Before the CP Valve
- Set Up the Flow Meter - Pipe Diameter, Wall Thickness and Pipe Material
- A Pressure Gauge is Required on the Hose Reel to be Tested - Quoted Seperatly if Required
- Fully Open the Hose Reel CP Valve but keep the Nozzle Closed - Record Standing Pressure (Zero Flow)
- Fully Open the Hose Reel CP Valve and Nozzle - Record Flow Rate and Pressure
- Above Testing is done Hourly from 06h00 to 18h00
- Council Supply Averages based on 13 Tests in Total
Why an Ultrasonic Flow Meter.
- Ultrasonic flow meter is used to measure flow rates of clean liquid (liquid with not more than 5% solids or 2% gas) in pipes.
- Will work on most types of non-aerated liquids with low solid particle content such as water, sea water and most oils.
- The equipment comes with clamp on transducers for non-invasive measurement.
- The unit uses two sensor, one that acts as an ultrasonic transmitter and the other as a receiver.
- The software calculates the time it takes for the ultrasonic pulse to pass from the transmitter to the receiver, which is dependent on the flow rate.
Ultrasonic Meter Specifications
- Pipe Diameter Range: 25mm – 50mm
- Sensor Dimensions: 318mm x 59mm x 85mm
- Operating Temperature: -30°C to 90°C
- Accuracy ±1% - 2% value of the reading (0.5 - 30m/s)
- Pipe Material
- Cast Iron
- Stainless Steel
- Ductile Iron
- Copper
- PVC
On Completion of the Flow Test a Report will be Provided Specifying:
- Flow Rate - One Hose Reel In Operation
- Standing Pressure of Hose Reel (Zero Flow)
- Pressure at Flow Reading - One Hose Reel in Operation
- Average Readings based on 13 Tests in Total