![](https://buzzapex.com/img/no-image.jpg)
- Price:
- ZAR 32,118.20
- Sold by:
-
Ibr Fire
![Share Systems (Supply And Install) - Technical Consultants Only Product Catalogue Share Systems (Supply And Install) - Technical Consultants Only Product Catalogue](temp/baQrTb_18c55841aad46b28a42d670b49511cbf.png)
Supply and Installation of a 2 Loop Addressable Fire Detection Panel including:
- Mounting of the Control Panel
- Cable Glands at Cable Entry Points
- Termination Lugs on all PH30/120 Cable
- Connection of Loop and Sounder Cables
- Labelling of Zone List
- 2 x 17ah Back-Up Batteries
- GSM Module for 24-hour Monitoring Including Escaltion Messages
- Programming
Programming Includes:
- Load all Installed devices onto the Panel
- Program Device location text
- Create and populate zones for rapid identification
Create Cause and Effect Programming such as
- Double Knock Alarm Conditions
- Staged Evacuation Protocols
- Elevator Homing
- AC/Mains Shutoff
- Emergency Door Release
Program Ancillary devices:
- Sprinkler Control Valve Tamper Alarms
- Sprinkler Control Valve Flow Switches
- Electronic Smoke Vents
- Suppression System Monitoring
- High Powered 220vac Alarm Devices
Client to provide:
- Existing System Design and Documentation as per SANS 10139 Clause 11.2
- Should the Design not be available the client is to provide:
- Device location text
- Zone Descriptions (Max 20 Devices per Zone)
- Cause and Effect parameters
- Ancillary device descriptions and parameters
- 220 V From dedicated circuit breaker in the DB Board to the Fire panel
- Isolation Switch labelled - “ FIRE PANEL - DO NOT SWITCH OFF ”
- Circuit Breaker to be labelled - “ FIRE PANEL - DO NOT SWITCH OFF ”
- RICA Registered SIM Card for SMS Communicator
- Phone numbers of relevant employees to receive event conditions
CATALOGUE NAME : Systems (Supply and Install) - Technical Consultants Only
CATEGORY : Industrial
Supply and Installation of a 2 Loop Addressable Fire Detection Panel including:
- Mounting of the Control Panel
- Cable Glands at Cable Entry Points
- Termination Lugs on all PH30/120 Cable
- Connection of Loop and Sounder Cables
- Labelling of Zone List
- 2 x 17ah Back-Up Batteries
- GSM Module for 24-hour Monitoring Including Escaltion Messages
- Programming
Programming Includes:
- Load all Installed devices onto the Panel
- Program Device location text
- Create and populate zones for rapid identification
Create Cause and Effect Programming such as
- Double Knock Alarm Conditions
- Staged Evacuation Protocols
- Elevator Homing
- AC/Mains Shutoff
- Emergency Door Release
Program Ancillary devices:
- Sprinkler Control Valve Tamper Alarms
- Sprinkler Control Valve Flow Switches
- Electronic Smoke Vents
- Suppression System Monitoring
- High Powered 220vac Alarm Devices
Client to provide:
- Existing System Design and Documentation as per SANS 10139 Clause 11.2
- Should the Design not be available the client is to provide:
- Device location text
- Zone Descriptions (Max 20 Devices per Zone)
- Cause and Effect parameters
- Ancillary device descriptions and parameters
- 220 V From dedicated circuit breaker in the DB Board to the Fire panel
- Isolation Switch labelled - “ FIRE PANEL - DO NOT SWITCH OFF ”
- Circuit Breaker to be labelled - “ FIRE PANEL - DO NOT SWITCH OFF ”
- RICA Registered SIM Card for SMS Communicator
- Phone numbers of relevant employees to receive event conditions
Supply and Installation of a 2 Loop Addressable Fire Detection Panel including:
- Mounting of the Control Panel
- Cable Glands at Cable Entry Points
- Termination Lugs on all PH30/120 Cable
- Connection of Loop and Sounder Cables
- Labelling of Zone List
- 2 x 17ah Back-Up Batteries
- GSM Module for 24-hour Monitoring Including Escaltion Messages
- Programming
Programming Includes:
- Load all Installed devices onto the Panel
- Program Device location text
- Create and populate zones for rapid identification
Create Cause and Effect Programming such as
- Double Knock Alarm Conditions
- Staged Evacuation Protocols
- Elevator Homing
- AC/Mains Shutoff
- Emergency Door Release
Program Ancillary devices:
- Sprinkler Control Valve Tamper Alarms
- Sprinkler Control Valve Flow Switches
- Electronic Smoke Vents
- Suppression System Monitoring
- High Powered 220vac Alarm Devices
Client to provide:
- Existing System Design and Documentation as per SANS 10139 Clause 11.2
- Should the Design not be available the client is to provide:
- Device location text
- Zone Descriptions (Max 20 Devices per Zone)
- Cause and Effect parameters
- Ancillary device descriptions and parameters
- 220 V From dedicated circuit breaker in the DB Board to the Fire panel
- Isolation Switch labelled - “ FIRE PANEL - DO NOT SWITCH OFF ”
- Circuit Breaker to be labelled - “ FIRE PANEL - DO NOT SWITCH OFF ”
- RICA Registered SIM Card for SMS Communicator
- Phone numbers of relevant employees to receive event conditions